Comparison table for: The best-rated car door edge guards are ready to sale in the online market for you…
  |
Kurgo Car Door Guard Waterproof pet door cover, adjustable to fit small and large vehicles, simple installation, left and right door guards, easy to clean |
Check Price |
  |
3M 08582 36" Door Edge Protection Film Protects door edges from chips, scratches, and scuffs, easy installation, soap and water and squeegee, virtually invisible |
Check Price |
  |
Cowles T5602 Edge Trim Nick free, cuts with scissors, installs with adhesive, width 0.21 inch, height 0.31 inch, length 18 feet |
Check Price |
  |
Full Size 12' Clear U Shape Car Door Edge Guard Trim Protects from nicks and chips, height 3/8 inch, width 1/4 inch |
Check Price |
  |
Car Clear Door Edge Trim Guard Molding All Models DIY Kit Do-It-Yourself kit, 15 feet in length, 5/16 inches wide, flexible and durable high quality plastic, prevent paint chipping |
Check Price |
  |
TRUE LINE Automotive Black Door Edge L Shape Molding Kit With 3M Tape Do-It-Yourself kit, L shape molding, U Shape molding |
Check Price |
  |
Status High Glossy Slim Door Edge Guards Bumper Protector Trim Sticker Molding for Motors Auto Vehicle Front door conner bumper protector guards (9.5cm x 2.3cm), Rear door conner bumper protector guards (8.2cm x 2.0cm), Material ABS |
Check Price |
  |
uxcell a15061600ux0614 Car Sealed Strip Door Guard Buffer Car sealed strip, P type, longer: 18.5 x 2 x 1.5cm/7.3" x 0.8" x 0.6"(Lwt), shorter: 13.5 x 2 x 1.5cm/5.3" x 0.8" x 0.6"(Lwt) |
Check Price |
  |
Moulding Trim Strip - TOOGOO(R)20FT Chrome Car Door Edge Scratch Guard Protector Cover Silver Universal edge protector, simple to cut and apply, protector strip, fitted to doors, boots, grills, bumpers, interior |
Check Price |
  |
Dawn Enterprises DGAR16-HG Door Edge Guard - FROSTY 16' roll, 3/8” high slimline door edge guard, multiple uses |
Check Price |
Contents
You may like:
The Best Car Door Edge Guard Buying Guide
The right door edge guard can protect your vehicle from paint and dents.
However,
choosing the best model for the door edge guard can be an extremely difficult and time-consuming task.
To help you find a door edge guard to suit your needs,
you should consider some of the following factors before finalizing your purchase:
Material – Durable Rubber or Plastic
Door edge guards are usually manufactured with a durable rubber or plastic material to absorb impacts. While the plastic may appear weak, it is actually capable of sensing hits and pressures.
On the other hand,
rubber is more viable and can bounce off an object without leaving an impact.
Size Range
Possibly the most important factor you need when choosing a door guard. The length and size of a roll or spool can only range from 13 feet to 32 feet and above.
Some models also include individual strips that can be placed anywhere on the door.
If you are only planning to protect the driver’s side door, you won’t need a long spool, and may only need a strip.
However, if you want to protect every door or cover more space on the door, additional strips or more material will be required.
Adaptability
Before choosing an edge guard, make sure that it fits your vehicle properly. Some models may not be suitable for certain trucks, cars, or SUVs.
This may be due to the door design of some vehicle models.
Appearance
It is very possible that the door guard you choose changes the entire appearance of your vehicle. Once the material is installed, the door will have either a clear or black trim.
Therefore, it is advisable to choose an edge guard that adds a good accent to your doors.
How to Remove the Door Edge Trim
You do not need to open your toolbox. To tackle this project effectively, all you will need is:
- A hairdryer (possibly a heat gun)
- Rubbing alcohol
To remove the door edge trim on your car, follow these 3 steps:
- Use a hairdryer on low heat to heat the edge trim. This softens the adhesive. Take your time and be careful not to overheat. If the trim is not heating, increase the heat slightly. If the trim is stubborn, a heat gun may be the best option.
- The trim feels hot or almost warm aftertouch, gently peel it away from the door.
- Once the trim is off, remove any residual adhesive with rags and rubbing alcohol.
FAQs
Question: Can I remove the door edge guard from the car?
Answer: Yes, you can easily remove the guard by peeling it off with your fingers.
Question: Will the weather impact the look of door edge guards?
Answer: While rain may discolor the plastic trim, it should not impact all types of guards.
Question: Will a door guard ruin the paint around the car’s door?
Answer: Door guards will not ruin or damage the paint they are wrapped around.
Question: Is the car door edge guard strong enough to stop all the dents?
Answer: It cannot prevent all damage. If you open the door with extreme force and hit a vehicle next to it, you may still get a dent or a ding. It is meant to act as a barrier against normal wear and tear.
Final Thought
This long-lasting and high-quality car door edge guards will save your door from dance and dents, scratches while adding appearance at the same time.
Now, It’s Over To You!
Now I’d like to hear from you: Leave a comment to let me know.
Spread it by Sharing on social media…
Asking questions are genuinely fastidious thing if you are not understanding anything
completely, however this paragraph presents nice
understanding yet.
Thank you. If you have more query then feel free to contact us.