How to Clean and Maintain Your Electric Skateboard

After each ride in a muddy street during the rainy season or just at the end of a long snowy winter, you might want to store your electric skateboard.

But before you store the electric skateboard, your board must be in a squeaky clean state.

Besides, these boards being a high-end investment needs regular maintenance for long-lasting performance.

In this short how-to article, I am going to describe how to clean and maintain your electric skateboard in the most convenient way.

Cleaning the Electric Skateboard

If you want your electric skateboard to perform for a more extended period, it is essential that you keep it clean. So, regular washing is necessary.

Fortunately, cleaning an electric skateboard is quite an easy task.

However, if you are interested to find some of the best electric skateboards, you may pay a visit to the following site.

Things you will need

• A piece of cloth
• Detergent
• Water

The Process

1. At first, take some sophisticated and dedicated detergent to use for cleaning the electric skateboard. Although there’s no special detergent for skateboards, the car washing soaps or detergents might help you to get your job done.
2. As you are ready with your dampened cloth, apply it on the dirt and grease of the skateboard. Use mild to moderate pressure to wipe off the trash.
3. Repeat the process twice or thrice until you are satisfied with the cleanliness of your electric skateboard.

That’s it! Your favorite electric board is already for the next tour or for storing.

Electric Skateboard Maintenance

Cleaning the skateboard doesn’t ensure its longevity; instead, it also depends on the proper maintenance of the skateboard. Some of the most significant maintenance work may include but are not subject to-

Maintaining the Bearings

Bearings are, undoubtedly, one of the most critical parts of your electric skateboard. You may use a special oil to maintain the bearings to keep them in an optimal state. You will find much oil in the market for bearing maintenance.

Motors and Wheels Maintenance

The wheels or motors of an electric skateboard needs regular maintenance and check-up for proper functioning. Skateboard wheels are often made of stainless steel and so, may require a similar cleaning like ordinary stainless steel.

You may use vinegar to soften the stain on the wheels and then, use a dampened cloth to wipe off the dirt to get a clean pair of wheels.

Moreover, if the wheel profile gets beyond 5mm, immediately change it to avoid accidental falling as you ride the skateboard. The tire pressure should always remain between 30-50 PSI.

To know what is PSI and how it determines a lot of things, you may follow the water pump buying guide.

Battery Maintenance

To charge the battery, at first connect the charger with your electric skateboard. Then, use the other half of the to connect it with the wall socket. Unplug the charger when it indicates the battery is full.

If you are planning to store your skateboard for a few months, it is suggested that you recharge the battery at least once a month. It ensures long-lasting performance from the battery.

Adjusting the Bolts & Screws

If the bolts and screws aren’t properly tightened, it may well cause a slip as you ride on your favorite skateboard. So, regularly check the bolts and screws to see if these are in the right state.

Since the bolts and screws receive much vibration during rides, regular checking is even more critical. You may use a T-tool to check the pins.

An Important Note

Always remember that the use of water directly on your electric skateboard is detrimental. The use of water may damage the bearings and even the wheels.

So, always avoid using water directly on the skateboards. Instead, use a dampened cloth (make sure it has the least amount of water) to clean and maintain your electric skateboard.

Conclusion

Cleaning and maintaining an electric skateboard are a relatively easy task. It doesn’t ask for heavy investment of time and effort; instead, your urgency and consciousness is enough.

So, the next time you return from a hectic ride or want to store your electric skateboard after the winter, don’t forget to make it clean.

Moreover, the maintenance will ensure that your investment on the skateboard lasts even longer. That’s all about today.

Happy Skating, Happy Winter.

Sale

Ryobi 1,600-PSI 1.2-GPM Electric Pressure Washer (Model RY141612)

• Brand New in box; The product ships with all relevant accessories
• Brand new and boxed Product ships with all relevant accessories
• Spray wand with nozzle quick connect coupler

Check Price Now

Now, It’s Over To You!

Now I’d like to hear from you: Leave a comment to let me know.

Spread it by Sharing on social media…