A trampoline is an open or tarpaulin bed supported by springs. It is used for sports, especially for children. Kids love to jump on the trampoline. The trampoline is also fun for adults and can also be used for jumping athletes, gymnasts, or drivers.
But safety is just as important as the fun on the trampoline. You have to check the safety part before riding the trampoline. This should be the priority for your children. By using a net on the trampoline, you can secure it and reduce accidents, injuries and risks. Without a safety net, you cannot avoid accidents on a trampoline. If there is a net around the trampoline, then you can try stunts and tricky jumps.
Most of us think that netting on a trampoline is a complex task. They do not know the correct net format, and some install it incorrectly. If you know the right way, you will understand how simple it is. First, you need to collect all the necessary materials for the net on the trampoline, and then you can start step by step. Through this article, you can easily learn how to put a safety net on the trampoline. By following the information and instructions, you can install it easily.
4 Steps On How to put a net on a trampoline?
Pole assemble:
To do this, you must follow the procedure correctly; Initially, you need to assemble a pole around the trampoline. The poles can be aluminum or steel pipe and need to be put together. By assembling the poles, they can be connected to the legs of the trampoline.
You should use different types of columns, such as straight columns and curved columns. Straight struts are used for the conical part for the lower side and curved struts for the upper side. You need to install the lower pole in the clamp. You need to put the rubber cap on the uprights face down.
Fixing poles to the base of the trampoline:
After inserting the poles into the clamp, the plastic bracket must be attached. You need to make sure that the bracket reaches the pole correctly. Next, you need to align the lower plate with the mark on the trampoline base frame. There will be two poles per pole; one 2″ below the frame and one 2″ above must be attached. Then, the leg of the trampoline must be tightened and secured with nuts and brackets. This step must be repeated for all columns.
Finally, when you are done with all these steps, you need to cover them with PVC sheets and postal covers. Before connecting the net, it must be ensured that the two shafts are tightly connected to the base of the trampoline.
Read More: How to Keep the House Clean with Little Kids
Attaching the net to a pole:
In this step, you need to attach the net to the trampoline base. The mesh must be fully extended before it is attached. You also need to make sure the pole is aligned correctly.
Then you need to unload the net. There are two ways to take apart the net; One down and one up. But, downward is more accessible than up one.
You have now reached the final step in installing the trampoline net to secure the net to the poles. You must attach the net tightly to each pole. You can use loop types and defensive nodes to connect the net. This is the essential part of the entire network installation process. The trampoline can be used safely after installing the appropriate net assembly step.
Safety of the net:
You must provide a security and safety trampoline net. For this purpose, you can use caps and Chooks on the poles. Another important thing is the bottom of the net. The bottom should be connected to the V-rings of the trampoline mat. After a few days of installing the net, you should scan and re-scan nodes and loops. If necessary, you should reinstall it to maintain a high level of security.
Conclusion:
If you follow our guide, you will be able to install the safety net properly. There are a few tips to remember, such as matching net size, pole height to fame, and matching pole count to trampoline quantity. You need to monitor the net scaling to determine if a net replacement is required. And, for a quality trampoline set, we can suggest checking outdoorforfun.
Leave a Reply