During winters, the cold and windy air often enters our room due to unintentional and small leakages in the door and causes energy wastages.
However,
Now you can get rid of this energy waste by using weatherstripping in your door. To make your home energy-efficient, today, we are going to discuss how to install weather stripping on the door frame.
Types of weather stripping
Depending on the nature of work, there are several types of weatherstripping available in the market. Most of them are quite budget-friendly and accessible to homeowners.
Nonetheless,
The below-mentioned strippers are most popular among people-
- Foam based weather strippers are designed to airtight your home door and window in a secure way. Available in rubber and plastic structure, these strippers are cheap and has an extra cushioning effect to your door.
- Felt based strippers are being used since prehistoric times to seal the door leakage. It is nowadays built with adhesive giving it a premium quality.
- There are some weather strippers made from copper, bronze or steel and commonly known as metal strips.
Considering price, availability, and easy installation process, we are going to describe the ways to install foam-based weather stripping on a door frame.
Worth reading for you:
Effective ways to install weather stripping on a door frame
The following steps will guide you through the entire weatherstripping installation process.
Removing old strippers
If you have previously installed any strippers, peel it off. You can remove the adhesive based strippers with your hand, but the metal ones will require a screwdriver to remove them.
Cleaning the door
The door jamb often gets dirty with debris and residue. Clean them using water and soap to increase the effectivity of your weather stripping.
Additionally, fill up if there is any hole on the jamb.
How to Clean Doors, 6 Panel Doors, Metal Doors, Deep Cleaning, Maintenance Clean
Worth reading for you:
Measurement is necessary
Now use a measuring tape, carefully measure the length of the door from the top to bottom and side to side. It is essential to cut down your foam-based weather strippers to apply them on the frame.
Cutting down the weather stripping
After measuring the frame length precisely, its time to cut down the weather stripping accordingly. You will need three pieces of strippers. You can use a sharp scissor or knife to cut the strip and use a pencil to mark the right measurement on the strip.
How To Replace A Door Weatherstrip Seal [Easy DIY]
Lining the strip
To line the piece against the door frame, at first, but the end of the weatherstripping right on top of the door jamb. Then slowly place the rest of the weatherstrip to the bottom of the frame. While you place the stripes, be careful not to put it on the door.
Worth reading for you:
How to Weatherstrip Doors- DIY Home Improvement
Peeling the backing
Remove the backing of the weatherstrip after you have aligned it on the top and two sides of the door frame.
How to Install Weather Stripping For Dummies
Sticking the weather stripping
It is the last stage of installing the strip. Use your thumb to apply pressure on the weatherstrip so that it attaches accurately on the door frame.
Easily Replace Weather Stripping on an Exterior Door
Final Verdict
Installing weather stripping on the door frame is a natural process. Once you have installed it, check the door to ensure that there aren’t any leakages.
We hope that this installation guide will help you keep your home warm during the chilly winters.
- Brand New in box; The product ships with all relevant accessories
- Brand new and boxed Product ships with all relevant accessories
- Spray wand with nozzle quick connect coupler
Now, It’s Over To You!
Now I’d like to hear from you: Leave a comment to let me know.
Spread it by Sharing on social media…
Leave a Reply